Water Glycol Type Flame Retardant Hydraulic Fluid

Water Glycol Type Flame Retardant Hydraulic Fluid
Produkteinführung:

Water-E It is a perfect and stable bath lotion, with a long-lasting effect of 1-20% ethyl acetate, 1-20% water and 1-20% abrasive. 

Anfrage senden
Inhalt

Product Information


Water-E It is a perfect and stable bath lotion, with a long-lasting effect of 1-20% ethyl acetate, 1-20% water and 1-20% abrasive. It is formulated with a variety of other additives. It is characterized by excellent anti-wear properties, good adhesion to steel and other metals. Anti-rust effect, good defoaming and gas release properties, good anti-emulsification properties for mineral oil. If properly maintained, the product has a virtually unlimited service life and will not deposit in the system.Sediment or residue. Widely used in hydraulic systems in various fields of industry.


Physical and chemical indicators


project

Quality indicators

Test methods

Viscosity Grade

22 

32 

46 

68 

GB/T3141

 Kinematic viscosity (40℃)/(MM²/S)

19.8-24.2

28.8-35.2

41.4-50.6

61.2-74.8

GB/T265

Appearance

Clear and transparent

Visual inspection

Moisture (mass fraction)/% not less than

35 

SH/T0246

Pour point/℃

Report

GB/T3535

pH value (20℃)

8.1-11.0

ISO20843

Corrosion resistance

No green or black change on copper sheet

SH/T0752

Density(20℃)

1.07 

GB/T1884

Manifold combustion experiment

pass

SH/T0567

Cleanliness level, not more than

FS791830092

The data is for reference only, and the specific data is subject to factory inspection.


Excellent product characteristics


1.Flame retardant performance

Sencro water glycol fire resistant hydraulic fluid is not absolutely non-flammable, but it will not burn under most conditions.


2.Wear resistance

In many equipments using water glycol, a large number of use cases have confirmed that this fluid has good anti-wear properties. During the product development and production process, Sencro  water glycol fire resistant hydraulic fluids are subjected to pump bench tests. In particular, Vickers vane pump experiments are carried out.


Pump Model

Vickers V105 C

Test time

250 Hours

pressure

105 Bar

Liquid temperature

45℃

Pump revolutions

1500 RPM

Ring wear

3-25 MG

Leaf damage

1-7 MG

Wear data shows that Sencro hydraulic fluid has excellent anti-wear performance. In the same experiment, the wear amount shown by mineral oil-based hydraulic oil is not significantly different from that of Sencro hydraulic fluid .


3. Viscosity/temperature characteristics

Sencro  hydraulic fluid , like mineral oil, has a smaller change in viscosity with temperature changes. This is commonly referred to as having a high viscosity index. This characteristic is very important for maintaining the working stability of the hydraulic system.


4. Compatibility of metal and non-metal materials

Since Sencro glycol hydraulic fluid contains gas-liquid phase rust inhibitors, it can protect metal materials in the hydraulic system that have long-term contact with Sencro glycol hydraulic fluid from corrosion. It should be noted that since the content of gas-phase rust inhibitors must be controlled within a certain range, it is difficult to avoid rust on the inner surface of the tank cap due to the effect of attached condensed water. Therefore, it is recommended that the tank cap be made of stainless steel, or that the surface of the tank cap be treated with rust prevention by other methods. When selecting the material of the filter element, you should also pay attention to the compatibility issue. All materials that are compatible with water, such as polyester fiber, specially treated celluloid fiber, glass fiber, and wire mesh, can be used in water glycol flame-retardant hydraulic fluid . If it is a paper filter element, it needs to be treated with phenolic resin before it can be used.

Scope of use and precautions


Scope of selection


1. According to the working environment
Sencro hydraulic fluids are widely used in equipment working in the following environments
 - open flames
- molten metal
- hot metal surfaces

It is also used in places where hydraulic oil fire can cause great harm to production personnel and equipment

2.Foundry industry

Sencro hydraulic fluids are mainly used in the following industrial production

Die casting machines, shaping machines and automatic control devices for die casting machines, melting furnaces and constant temperature furnaces, gravity die casting machines, dual-purpose die casting machines
Steelmaking industry:
Coke oven door locking machine and coke pusher, hydraulic control bending system (continuous casting segment and straightening machine), continuous casting machine and electric furnace equipment, furnace cover lifting and rotating mechanism, dumping mechanism, electrode control device, turntable, mud gun
Other industries:
Forklifts for transporting hot metal, operating machines in forging shops, lifting and pushing devices for furnace doors of heat treatment furnaces, hydraulic drives for rotating stages in theaters, hydraulic lifts.

3.Other applications

Sencro water glycol hydraulic fluid can also be used in some systems like this
They hope that the leaked liquid can be completely dissolved in water and has good biodegradability. Such systems include:
- Hydraulic systems of public wastewater treatment plants.
- Hydraulic control systems of river gates.

5.Packaging


Water glycol Sencro fire resistant hydraulic fluid is shipped in 200 - liter iron drums. The product has excellent chemical stability. It will not decompose or deteriorate when stored at room temperature. Freezing and thawing will not affect its performance.

Anfrage senden